Inner duct wall of flexible, folded and perforated duct. The inner wall is covered with mineral wool insulation. The insulation is covered with an outer jacket.

The insulation reduces the noise passing through the silencer. For best attenuation the silencer shall be pulled out to full length.

BDLD is a curved rectangular attenuator with convensional design with width and height dimensions that doesn't exceed the present connection dimensions.

Sizes available in horizontal mounting between (a x b) 400x300 mm to 2400x2400 mm and in vertical mounting between 400x300 mm and 2000x1500 mm.

Design

BDLD has an external shell of trapezoidal corrugated sheet metal for stabillity and reduced risk of oscillation.
BDLD is designed for low pressure drop with baffle combinations that attenuate aspecially low frequences well.
The type of insulation material is developed to provide good sound properties, low weight and to be cleanable.

BDLD meets the requirements of air tightness class C and pressure class 2 according to EN 1507:2006.

Tested according to ISO 7235.

BDLD is equipped with joining profile type RJFP / LS.

Tools for dimensioning and planning

The IT-online calculation tool lindQST or DIMsilencer are recommended for fast choise of attenuator or a complete and fast sound calculation of the duct system.

BSLCU is a circular curved silencer.

Nominal insulation thicknesses are 50 mm or 100 mm. Lack of space is a frequent problem in air treatment installations. This means that it is often difficult to find enough straight lengths to install a straight silencer. This problem can be eliminated by installing a curved silencer. For the same length, it mostly has better attenuation than the equivalent straight silencer. In particular, you get better attenuation at high frequencies 4 and 8 kHz.

Attenuation material is mineral wool. The BSLCU are made of sheet metal and an inner tube made of sheet steel with small openings to be able to withstand mechanical cleaning and at the same time do not interfere with the insertionloss. The space between them is filled with mineral wool and a nonwoven cloth are inserted between inner tube and the attenuation material, to prevent fibres from the insulation getting into the duct system. Silencer can be cleaned by rotating nylon brushes, vacuum cleaner or damp cloth.

Technical data for insertion loss, pressure drop and self-generated noise based on test conducted in accordance with ISO 7235.

Special materials and sizes, please contact Lindab sales.

BSLU is a circular curved silencer.

Lack of space is a frequent problem in air treatment installations. This means that it is often difficult to find enough straight lengths to install a straight silencer. This problem can be eliminated by installing a curved silencer. For the same length, it mostly has better attenuation than the equivalent straight silencer. In particular, you get better attenuation at high frequencies (4 and 8 kHz).

Nominal insulation thicknesses are 50 mm or 100 mm.

Attenuation material is mineral wool. The BSLU's are made of sheet metal and an inner tube made of sheet steel with small openings to be able to withstand mechanical cleaning and at the same time not interfere with the insertion loss. The space between them is filled with mineral wool and a nonwoven cloth is inserted between inner tube and the attenuation material, to prevent fibres from the insulation getting into the duct system. Silencer can be cleaned by rotating nylon brushes, vacuum cleaner or damp cloth.

Tested according to ISO 7235 standard.

Special materials, sizes and flanges on request. Please contact Lindab sales.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool LindQST or our free to download software DIMsilencer.

Lack of space is a frequent problem in air treatment installations. This means that it is often difficult to find enough straight lengths to install a straight silencer.

This problem can be eliminated by installing a curved silencer.

For the same length, it mostly has better attenuation than the equivalent straight silencer. In particular, you get better attenuation at high frequencies (4 and 8 kHz).

Insulation thickness for BSLUSS2 100: 100 mm.

Insulation thickness for BSLUSS2 50: 50 mm.

Tested according to ISO 7235.

BSLUSS2 is tested with the whole Lindab smoke evacuation system according to EN 1366-9.

DACKA is a rectangular duct attenuator in galvanized steel* with splitters filled with Acutec® attenuation material.
Acutec® is a hygienic and washable polyester absorption material with high airflow and shock resistant non-woven fleece finishing and no loose fibres.

Attenuator is equiped with joining profile IT (=LS), EURO-20 (=RJFP20) or EURO-30 (=RJFP30).

Attenuators can be ordered with splitters protected by perforated plate; additional thermal insulation 50mm (LE50) or more and with fire insulation on request.

Attenuators with TO empty section are available with inspection hatch. Fully cleanable and openable attenuators you will find in the product range: DACKA-A.

To calculate the attenuator you can use our IT-online tool LindQST or DIM-silencer, where splitter distance, length and height can be optimized for the best perofmance.

Tested according to ISO 7235 standard.

* Special material and sizes, please contact your local Lindab sales department.

DACKA-A is an openable duct attenuator in galvanized steel* with splitters filled with Acutec^® attenuation material. Splitters are removable for cleaning or replacement.

Acutec^® is a hygienic and washable polyester absorption material with high airflow and shock resistant non-woven fleece finishing and no loose fibres.

Bigger attenuators are reinforced by an outer modular frame.

Connection frame possibilities: IT- (LS), EURO-20 (RJFP-20) or EURO-30 (RJFP-30).

Attenuators can be ordered with splitters protected by perforated plate; additional thermal insulation 50mm (LE50) or more and with fire insulation on request.

To calculate the attenuator you can use our IT-online tool LindQST or DIMsilencer, where splitter distance, length and height can be optimized for the best performance.

Tested according to ISO 7235 standard.

* Special material and sizes, please contact to Lindab sales.

DACKA-V is a curved rectangular sound attenuator with conventional design with width and height dimensions that doesn't exceed the present connection dimensions. Sizes available between (a x b) 400 x 200 mm to 2400 x 2000 mm.

Design

DACKA-V has an external shell of trapezoidal corrugated sheet metal for stability and reduced risk of oscillation. The absorption material Acutec® is developed to provide good sound properties, low weight and to be cleanable. The sound attenuator is equipped with the joining profile type RJFP or LS or PG.

DACKA-V meets the requirements of air tightness class C and pressure class 2 according to EN 1507:2006.

Tested according to ISO 7235.

For special materials or sizes, please contact your local Sales department.

To select and size the appropriate attenuator to provide the best performance for your application please use our online tool LindQST.

DLD has a conventional design with dimensions that not exceed the corresponding connection dimensions. The attenuator can be manufactured in all standard duct sizes.

Design

DLD has an outer sheet casing of trapezoidal corrugated sheet metal for stability and reduced risk of natural oscillation.
DLD is designed for low air resistance with baffle combinations that attenuate particularly low-frequency noise well.
The type of insulation material has been developed to provide good noise properties, low weight and to be cleanable.

DLD meets the requirements of air tightness class C and pressure class 2 according to EN 1507:2006.

DLD is equipped with joining profile type RJFP or LS.

Tools for dimensioning and planning

The software lindQST, DIMsilencer and Cadvent offer features for dimensioning and selection of products in an environment with 3D modelling. Computerised planning can be conducted with automatic presentation of noise levels, pressure drop etc.

Tested according to ISO 7235 standard.

DLDR has a conventional design with dimensions that not exceed the corresponding connection dimensions. The attenuator can be manufactured in all standard duct sizes.

The attenuator is provided with cleaning hatch and removable baffles.

Design

DLDR has an outer sheet casing of trapezoidal corrugated sheet metal for stability and reduced risk of natural oscillation.
DLDR is designed for low air resistance with baffle combinations that attenuate particularly low-frequency noise well.
The type of insulation material has been developed to provide good noise properties, low weight and to be cleanable.

DLDR meets the requirements of air tightness class C and pressure class 2 according to EN 1507:2006.

DLDR is equipped with joining profile type RJFP.

Tools for dimensioning and planning

The software lindQST, DIMsilencer and Cadvent offer features for dimensioning and selection of products in an environment with 3D modelling. Computerised planning can be conducted with automatic presentation of noise levels, pressure drop etc.

Tested according to ISO 7235 standard.

DLDY is fitted with built-in side baffles located outside the fitting dimensions. The products can be manufactured in all standard duct sizes.

Design

DLDY has an external shell of trapezoidal corrugated sheet for stability and reduced risk of natural oscillation.
DLDY is designed for low air resistance with baffle combinations that dampen particularly low-frequency noise well.
The type of insulation material is Lindtec which has been developed to provide good noise properties, low weight and to be cleanable.

DLDY meets the requirements of air tightness class C and pressure class 2 according to EN 1507:2006.

DLDY is equipped with joining profile type RJFP.

Tools for dimensioning and planning

The software lindQST, DIMsilencer and Cadvent offer features for dimensioning and selection of products in an environment with 3D modelling. Computerised planning can be conducted with automatic presentation of noise levels, pressure drop etc.

Tested according to ISO 7235 standard.

KVAPL is a rectangular attenuator with circular connections and a low installation height.

Attenuation material is mineral wool covered with the textile to prevent fibres coming out. The KVAPL is made from galvanized steel sheet.

Attenuator can be cleaned by rotating nylon brushes, vacuum cleaner or damp cloth. Openable model can be used as cleaning door for the duct system.

Fulfils tightness class C.

Tested according to ISO 7235 standard.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool lindQST.

Special materials and sizes, please contact Lindab sales.

Compact angled silencer with good attenuation.

The silencer’s measurments makes it suitable for installation above suspended ceilings or where installation space is limited.

The silencer’s attenuation material is Acutec^® (polyester).

Fullfils tightness class C.

Tested according to ISO 7235 standard.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool lindQST or our free to download software DIMsilencer.

Special materials and sizes, please contact Lindab sales.

Compact angled silencer with good attenuation.

The silencer’s measurments makes it suitable for installation above suspended ceilings or where installation space is limited.

The silencer’s attenuation material is Acutec ^® (polyester).

Fullfils tightness class C.

Tested according to ISO 7235 standard.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool lindQST or our free to download software DIMsilencer.

Special materials and sizes, please contact Lindab sales.

KVDPX is a rectangular attenuator with circular connections and a low installation height.

Attenuation material is Acutec® polyester. The KVDPX are made from galvanized steel sheet.

The attenuator can be cleaned by rotating nylon brushes, vacuum cleaner or damp cloth. With the openable models there are possibilities to replace the acoustic infill.

Fulfils tightness class C.

Tested according to ISO 7235 standard.

For special requirements such as material, perforated sheet on top of the attenuation material, sizes and flanges - this can be made on request. Please contact Lindab sales.

Baffle silencer with low installation height.

Inner pipe of perfoated sheet metal. A fibre cloth prevents tear off glass fibres.

Fulfils tightness class C.

The baffle has an approved surface lining that can withstand cleaning with rotating nylon brush.

Tested according to ISO 7235 standard.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool lindQST or our free to download software DIMsilencer.

Special materials and sizes, please contact Lindab sales.

Straight silencer with circular connection and low installation height.

LRCA dimensions make it particularly suitable for installation above suspended ceilings or where space is otherwise limited.

Fulfils tightness class C.

Tested according to ISO 7235 standard.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool lindQST or our free to download software DIMsilencer.

Special materials and sizes, please contact Lindab sales.

Straight silencer with circular connection and low installation height.

LRCB dimensions makes it particulary suitable for installation above suspended ceilings or where space is otherwise limited.

LRCB is produced with a perforated inner tube. The LRCB has a fiber cloth between the inner tube and the insulation material in order to avoid tearing the glass wool.

Fulfils tightness class C.

Tested according to ISO 7235 standard.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool lindQST or our free to download software DIMsilencer.

Special materials and sizes, please contact Lindab sales.

Low height rectangular attenuator.
Attenuation material is Lindtec glass wool.

Insulation has a surface protector which can be cleaned with a rotating nylon brush or vacuum cleaner.

LRLB meets the requirements of tightness class C and pressure class 2 according to EN 1507:2006.

Tested according to ISO 7235 standard.

LRLB is pressure equipped with joining profile type RJFP or LS.

For special materials and sizes, please contact Lindab sales.

The attenuator is also available with the following accessories/ options:
TRA = Non-insulated inspection hatch.

Low height rectangular attenuator.
Attenuation material is Acutec® (Polyester).

Insulation has a surface protector which can be cleaned with a rotating nylon brush or vacuum cleaner.

LRLS meets the requirements of tightness class C and pressure class 2 according to EN 1507:2006.

LRLS is equipped with joining profile type RJFP or LS.

Tested according to ISO 7235 standard.

For special materials and sizes, please contact Lindab sales.

MINKA is a rectangular duct attenuator in galvanized steel* with baffles (splitters) filled with felt coated mineral wool attenuation material.

Connection measurements: 400 x 300 - 3000 x 3000.
Bigger attenuators are reinforced by an outer modular frame.
Connection frame possibilities: IT- (LS), EURO-20 (RJFP20) or EURO-30 (RJFP30).

Attenuators can be ordered with splitters protected by perforated plate; additional thermal insulation 50mm (LE50) or more and with fire insulation on request.

Attenuators with TO empty section are available with inspection hatch (door). Fully cleanable and openable attenuators you find in the product range: MINKA-A.

Fire classification mineral wool: EN 1182: non-combustible; Fire-reaction: EN 13501: class A2.

To calculate the attenuator you can use our IT-online tool LindQST or DIMsilencer, where splitter distance, length and height can be optimized for the best perofmance.

Tested according to ISO 7235 standard.

MINKA-A is an openable duct attenuator in galvanized steel* with splitters filled with felt coated minearal wool attenuation material. Splitters are removable for cleaning or replacement.

Bigger attenuators are reinforced by an outer modular frame.

Connection frame possibilities: IT- (LS), EURO-20 (RJFP-20) or EURO-30 (RJFP-30).

Attenuators can be ordered with splitters protected by perforated plate; additional thermal insulation 50mm (LE50) or more and with fire insulation on request.

Fire classification mineral wool: EN 1182: non-combustible;
Fire-reaction: EN 13501: class A2.

To calculate the attenuator you can use our IT-online tool LindQST or DIMsilencer, where splitter distance, length and height can be optimized for the best perofmance.

Tested according to ISO 7235 standard.

* Special material and sizes, please contact to Lindab sales.

PVA is a circular straight silencer with pod.

Nominal insulation thicknesses are 50 or 100 or 150 mm.

Attenuation material is mineral wool. The PVA's are made from galvanizes steel sheet and an inner tube made of sheet steel with small openings to be able to withstand mechanical cleaning and at the same time not interfere with the insertion loss. The space between them is filled with mineral wool and a nonwoven cloth is inserted between inner tube and the attenuation material, to prevent fibres from the insulation getting into the duct system. Silencer can be cleaned by rotating nylon brushes, vacuum cleaner or damp cloth.

Tested according to ISO 7235 standard.

Fulfils tightness class C.

Special materials, sizes and flanges on request. Please contact Lindab sales.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool LindQST or our free to download software DIMsilencer.

PVAP is a circular straight silencer with pod.

Nominal insulation thicknesses are 50, 100 or 150 mm.

Attenuation material is mineral wool. The PVAP's are made from galvanizes steel sheet and an inner tube made of sheet steel with small openings to be able to withstand mechanical cleaning and at the same time not interfere with the insertion loss. The space between them is filled with mineral wool and a nonwoven cloth is inserted between inner tube and the attenuation material, to prevent fibres from the insulation getting into the duct system. Silencer can be cleaned by rotating nylon brushes, vacuum cleaner or damp cloth.

Tested according to ISO 7235 standard.

Fulfils tightness class C.

Special materials, sizes and flanges on request. Please contact Lindab sales.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool LindQST or our free to download software DIMsilencer.

PVD is a circular straight silencer.

Nominal insulation thicknesses are 50 or 100 or 150 mm.

Attenuation material is Acutec® polyester. The PVD's are made from galvanizes steel sheet.

The PVD 50 comes in two different designs.

Design code:

1 = Attenuation material covered with perforated plate

7 = Attenuation material polyester fibre element

The PVD 100 and 150 is with an inner tube made of sheet steel with small openings to be able to withstand mechanical cleaning and at the same time not interfere with the insertion loss. Silencer can be cleaned by rotating nylon brushes, vacuum cleaner or damp cloth.

Tested according to ISO 7235 standard.

Fulfils tightness class C.

Special materials, sizes and flanges on request. Please contact Lindab sales.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool LindQST or our free to download software DIMsilencer.

PVDP is a circular straight silencer with pod.

Nominal insulation thicknesses are 50 or 100 or 150 mm.

Attenuation material is Acutec® polyester. The PVDP's are made from galvanizes steel sheet and an inner tube made of sheet steel with small openings to be able to withstand mechanical cleaning and at the same time not interfere with the insertion loss. Silencer can be cleaned by rotating nylon brushes, vacuum cleaner or damp cloth.

Tested according to ISO 7235 standard.

Fulfils tightness class C.

Special materials, sizes and flanges on request. Please contact Lindab sales.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool LindQST or our free to download software DIMsilencer.

SLBGU is a circular straight silencer with centre splitter.

Nominal insulation thickness is 100 mm provided with 100 mm thick baffle. This gives very good attenuation across the entire range. Used when the acoustic require¬ments exceed the performance capabilities of the SLGU. Especially suitable for the large dimensions.

Attenuation material is mineral wool. The SLBGU are made of strong outer spiral seemed tube and an inner tube made of steel with small openings to be able to withstand mechanical cleaning and at the same time not interfere with the insertion loss. The space between them is filled with mineral wool and a nonwoven cloth is inserted between inner tube and the attenuation material, to prevent fibres from the insulation getting into the duct system. Silencer can be cleaned by rotating nylon brushes, vacuum cleaner or damp cloth.

Technical data for insertion loss, pressure drop and self-generated noise based on test conducted in accordance with ISO 7235.

Special materials and sizes, please contact Lindab sales.

Circular straight silencer provided with a 100 mm thick baffle.

Insulation thickness 100 mm.

This gives very good attenuation across the entire range. Used where very good attenuation is needed and SLU 100 is not enough.

Specially suitable for large dimensions.

Tested according to ISO 7235 standard.

Special materials and sizes, please contact Lindab sales.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool lindQST or our free to download software DIMsilencer.

SLGPU 100 is a circular straight silencer with a centre pod.

Nominal insulation thickness is 100 mm. This gives very good attenuation across the entire range. Used when the acoustic requirements exceed the performance capabilities of the SLGU. Especially suitable for the large dimensions.

Attenuation material is mineral wool. The SLGPU are made of strong outer spiral seemed tube and an inner tube made of steel with small openings to be able to withstand mechanical cleaning and at the same time not interfere with the insertion loss. The space between them is filled with mineral wool and a nonwoven cloth is inserted between inner tube and the attenuation material, to prevent fibres from the insulation getting into the duct system. Silencer can be cleaned by rotating nylon brushes, vacuum cleaner or damp cloth.

Technical data for insertion loss, pressure drop and self-generated noise based on test conducted in accordance with ISO 7235.

Special materials and sizes, please contact Lindab sales.

SLGPUSS2 is a circular straight silencer with pod.

Insulation thickness 100 mm.

Attenuation material is glass wool.

Material galvanized steel.

Tested according to ISO 7235 standard.

SLGPUSS2 is tested with the whole Lindab smoke evacuation system according to EN 1366-9.

SLGU is a circular straight silencer

Nominal insulation thicknesses are 100 mm or 150 mm.

Attenuation material is mineral wool. The SLGU are made of strong outer spiral seemed tube and an inner tube made of steel with small openings to be able to withstand mechanical cleaning and at the same time not interfere with the insertion loss. The space between them is filled with mineral wool and a nonwoven cloth is inserted between inner tube and the attenuation material, to prevent fibres from the insulation getting into the duct system. Silencer can be cleaned by rotating nylon brushes, vacuum cleaner or damp cloth.

Technical data for insertion loss, pressure drop and self-generated noise based on test conducted in accordance with ISO 7235.

Special materials and sizes, please contact Lindab sales.

SLRA is the basic element in the Aerodim™ attenuator series.
The SLRA is manufactured with a frame of galvanized sheet and absorption material type Lindtec™.
The SLRA is available in a width of 200 mm. The SLRA is also available in other lenghts and with other splitter distances than shown in the tabels.
Special materials and sizes, please contact Lindab sales.
The Lindtec™ surface is easy to clean and prevents removal of fibres. Due to the aerodynamic design, the SLRA has a low pressure loss and a low generation of flow noise. To calculate the attenuator, you can use our IT-program DIMsilencer, where splitter distance, length and height can be optimized for the best performance.

Rectangular curved attenuator from Aerodim™ series. SLRB is equipped with Aerodim™ baffles (splitters). The attenuator is manufactured with frame of galvanized sheet and absorption material type Lindtec™. The absorption wool is easy to clean while preventing the dispersal of fibres.

Due to aerodynamic design, the SLRB has a low pressure loss and low generation of flow noise. Due to the low pressure loss it is possible to use smaller duct sizes and still enjoy low energy consumption.

The baffles are available in a width 200 mm. Distances between the baffles vary according to the required attenuation and airflow.

Sizes available in horizontal mounting between (a x b) 400x300 mm to 2000x2000 mm and in vertical mounting between 400x300 mm and 2000x1500 mm.
Length of legs are always 300 mm. Width goes in 100 mm steps.

To calculate the attenuator, you can use our IT-online tool LindQST or DIMsilencer, where baffle distance, width and height can be optimized for the best performance.

Tested according to ISO 7235 standard.

Rectangular straight attenuator from the Aerodim™ series. SLRS is built with the Aerodim™ attenuator splitter SLRA.

The SLRA is manufactured with a frame of galvanized sheet and absorption material type Lindtec™. The splitter is available in a width of 200 mm. Attenuator is equipped with flange profile RJFP or LS.

Due to the aerodynamic design, the SLRS has a low pressure loss and a low generation of flow noise. To calculate the attenuator, you can use our IT-online tool LindQST or DIMsilencer, where splitter distance, length and height can be optimized for the best performance.

Tested according to ISO 7235 standard.

Rectangular straight attenuator from the Aerodim™ series. SLRSS2 is built with the Aerodim™ attenuator splitter SLRA.

The SLRA is manufactured with a frame of galvanized sheet and absorption material type Lindtec™. The splitter is available in a width of 200 mm. Attenuator is equipped with flange profile RJFP.

Due to the aerodynamic design, the SLRSS2 has a low pressure loss and a low generation of flow noise. To calculate the attenuator, you can use our IT-online tool LindQST or DIMsilencer, where width, height, length and splitter distance can be optimized for the best performance. On LindQST or DIMsilencer, this product is called SLRS.

Tested according to ISO 7235 standard.

SLRSS2 is tested with the whole Lindab smoke evacuation system according to EN 1366-9.

Circular straight silencer with transfer connections.

SLTR with Ød_{1 nom} 80 -250 mm
=> Nominel insulation thickness 50 mm.

SLTR with Ød_{1 nom} 315 -800 mm
=> Nominel insulation thickness 100 mm.

The attenuation material is Rockwool.

For sound attenuation values, see SLU50 and SLU100.

Tested according to ISO 7235 standard.

Special materials and sizes, please contact Lindab sales.

SLU is a circular straight silencer

Nominal insulation thicknesses are 50 mm or 100 mm.

Attenuation material is mineral wool. The SLU's are made of strong outer spiral seemed tube and an inner tube made of sheet steel with small openings to be able to withstand mechanical cleaning and at the same time not interfere with the insertion loss. The space between them is filled with mineral wool and a nonwoven cloth is inserted between inner tube and the attenuation material, to prevent fibres from the insulation getting into the duct system. Silencer can be cleaned by rotating nylon brushes, vacuum cleaner or damp cloth.

Tested according to ISO 7235 standard.

Special materials, sizes and flanges on request. Please contact Lindab sales.

To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool LindQST or our free to download software DIMsilencer.

SLUSS2 100 is a circular straight silencer with a connection diameter available between 315 - 800 mm. For smaller sizes, see SLUSS2 50.

Nominal insulation thickness 100 mm. Attenuation material is mineral wool. The SLUSS2's are made of an outer spiral seemed tube and an inner tube made of perforated sheet steel. The space between them is filled with mineral wool and a fibre cloth is inserted between the perforated sheet metal and the attenuation material, to prevent damage to the insulation material and fibers from getting into the duct system.

Tested according to ISO 7235 standard.

SLUSS2 100 is tested with the whole Lindab smoke evacuation system according to EN 1366-9.

SLUSS2 50 is a circular straight silencer with a connection diameter available between 100 - 400 mm.
Nominal insulation thickness 50 mm. Attenuation material is mineral wool. The SLUSS2's are made of strong outer spiral seemed tube and an inner tube made of sheet steel with small openings to be able to withstand mechanical cleaning and at the same time not interfere with the insertion loss. The space between them is filled with mineral wool and a nonwoven cloth is inserted between inner tube and the attenuation material, to prevent fibers from the insulation getting into the duct system.

Tested according to ISO 7235 standard.

SLUSS2 50 is tested with the whole Lindab smoke evacuation system according to EN 1366-9.

SLXU is a circular straight silencer.

Fulfils tightness class D.

Insulation thickness 50 mm.

Attenuation material is glass wool.

Material galvanized steel.

Tested according to ISO 7235 standard.

Special materials and sizes, please contact Lindab sales.
To select the appropriate silencer and optimize connection size and length for the best performance you can use our online tool lindQST or our free to download software DIMsilencer.

TUNE-A is the basic element in the TUNE attenuator series. TUNE-A is manufactured with a frame of galvanized sheet and stone wool absorption material covered with glass fleece surface.
The TUNE-A is available in width 100, 150 and 200 mm. The TUNE-A is also available in other lengths than shown in the tables.
Special materials and sizes, please contact to Lindab sales.

TUNE-PS is a conventional design with overall dimensions that do not exceed the duct connection dimensions. The attenuator is manufactured in standard duct sizes as detailed in the table below.

Design

Rectangular straight attenuator from the TUNE series. TUNE-PS is constructed using Lindab’s TUNE-PA splitter. The attenuator is manufactured with a casing of galvanized sheet steel and stone wool absorption material covered by a plastic inter-liner and wire mesh to prevent the migration of fibres into the airstream and to protect the acoustic media from grease and oil in kitchen applications.

The TUNE-PS is available with splitter widths 100 and 200 mm and is equipped with flange profile RJFP.

To select the correct Tune-PS attenuator, please use our free selection IT-online tool LindQST or DIMsilencer, where splitter distance, length and height can be optimized for the best performance.

Tested according to ISO 7235 standard.

TUNE has a conventional design with dimensions that not exceed the corresponding connection dimensions. The attenuator can be manufactured in all standard duct sizes.

Design

Rectangular straight attenuator from the TUNE series. TUNE-S is built with the splitter TUNE-A. The attenuator is manufactured with the frame of galvanized sheet and stone wool absorption material.

The TUNE-S is availabe with splitter width 100, 150 and 200 mm. Attenuator is equiped with joining profile RJFP.

To calculate the attenuator, you can use our IT-online tool LindQST or DIMsilencer, where splitter distance, length and height can be optimized for the best performance.

Testerd according to ISO 7235 standard.

TUNE-V is a curved rectangular sound attenuator with conventional design with width and height dimensions that doesn't exceed the present connection dimensions. Sizes available between (a x b) 400 x 200 mm to 2400 x 2000 mm.

Design

TUNE-V has an external shell of trapezoidal corrugated sheet metal for stability and reduced risk of oscillation. The absorption material Lindtec^TM is developed to provide good sound properties, low weight and to be cleanable. The sound attenuator is equipped with the joining profile type RJFP or LS or PG.

TUNE-V meets the requirements of air tightness class C and pressure class 2 according to EN 1507:2006.

Tested according to ISO 7235.

For special materials or sizes, please contact your local Sales department.

To select and size the appropriate attenuator to provide the best performance for your application please use our online tool LindQST.